How Fitting a Wooden Floor

Wood floors have been popular for decades and there are still those who prefer a natural and clean their homes. There are several advantages to having a wood floor because they have been very popular. An important advantage of this type of flooring is that it is easy to place at home without having to call a specialist.

Homeowners who are planning to fit wooden flooring in your home on your account must follow the steps listed below:

Before putting the wooden floor is essential to set a lower layer of the plant in which the wooden floor should be placed. Underlying can be bought at any hardware store or floors. We must ensure that the base layer is made of good quality to achieve the desired results. Usually made of foam and is to be set out in sections in the area where the soil is to be placed.

The first step in establishing a wood floor is to prepare the room or area where the soil is established. It is important to ensure that the floor is even and level. All protruding nails and other must be eliminated. Once the surface is properly prepared, the laminates or wooden floor can be established.


Boards can also be arranged in a staggered and irregular use half of a table instead of the whole to be better future and to avoid any obvious line on the floor. In most cases, details and instructions will be in the shops with wooden boards.

In areas where there is high humidity or moisture, the base layer is made of a moisture-proof material to avoid damage due to moisture in the soil.

Once the base layer is provided, the floor can be adjusted. Start from one corner of the room and leave a little space between the first row of tables and the wall. Once the first row of wooden planks placed on the floor, start with the second.

A complete row of boards should be equipped and then lifted out properly before they can join the first row of tables.

Continue to place the tables in the same way, completing one row before moving to the next until the entire floor. Once done, any strange or outside angles should be measured, cut and positioned to occupy the space. Along the sides of the room, an expansion joint should be maintained between tables and the wall. This gap can be covered with a round edge or a socket.

For a wood floor in the home is not very difficult, especially because in most cases, detailed instructions are provided by manufacturers.